Schaub Lorenz 42LT601B Bedienungsanleitung Seite 88

Volume
Press " " or " " button to select Volume . Press " "
or " " button to change the level of the Volume.
Equalizer
Press " " or " " button to select Equalizer . Press "
" button to view equalizer menu.
Press " " or " " button to change the preset. In
equalizer menu, the preset can be changed to Music ,
Movie , Speech , Flat , Classic and User .
Select the desired frequency by pressing " " or " "
button and increase or decrease the frequency gain
by pressing " " or " " button.
Press the " MENU " button to return to the previous
menu.
Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .
Balance
This setting is used for emphasizing left or right
speaker balance.
Press " " or " " button to select Balance. Press "
" or " " button to change the level of the balance.
Balance level can be adjusted between -32 and +
32.
Headphone
Press " " or " " button to select Headphone . Press
" " button to view the headphone menu.
Headphone sub-menu options are described below:
Volume
Press " " or " " button to select Volume . Press "
" button to increase headphone volume level. Press
" " button to decrease headphone volume level.
Headphone volume level can be adjusted between
0 and 63 .
02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 87 02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 87
Headphone Sound (optional)
Press " " or " " button to select Headphone Sound .
Using " " or " " button, you can select Main, PIP/PAP,
Active or Inactive.
Main : Main window sound.
PIP/PAP : PIP/PAP window sound.
Active : Sound of the current selection.
Inactive : Sound of the currently inactive window.
Sound Mode (optional)
Press " " or " " button to select Sound Mode . Using
" " or " " button, you can select Mono, Stereo, Dual I
or Dual II mode, only if the selected channel supports
that mode.
AVL
Automatic Volume Limiting (AVL) function adjusts the
sound to obtain fi xed output level between programmes
(For instance, volume level of advertisements tend to
be louder than programmes).
Press " " or " " button to select AVL . Press " " or
" " button to set the AVL as On or Off .
Audio Out
Press " " or " " button to select Audio Out. Press "
" or " " button to set the Audio Out as Speaker or
LineOut/SPDIF.
If you select to Audio Out as LineOut/SPDIF, you will
get audio through the active audio connectors. In this
case, audio output will not be available through TV
speakers and mute function cannot be used.
While LineOut/SPDIF is activated, if you press volume
" " / " " or mute button on your remote control,
the Audio Out indicaticator will be displayed on the
screen.
If you select to Audio Out as "Speaker" by using "
" or " " button, you can get audio through the TV's
speakers.
Effect
If you are watching a mono broadcast, set Effect on to
obtain a better sound effect which will be more stereo-
like. If the current sound system is stereo, switching
this effect on will give a more spatial effect.
Press " " or " " button to select Effect. Press " "
or " " button to set as On or Off .
SRS TruSurr XT
By pressing " " or " " select SRS TruSurr XT .
Press " " or " " button to set SRS TruSurr XT as
on or off.
Note: If you set SRS TruSurr XT as On, some features
in the Sound menu can be unavailable to be set.
English - 87 -
27.05.2010 14:31:10 27.05.2010 14:31:10