Displaying Tv Information; Mute Function; Picture Mode Selection; Freezing Picture - Schaub Lorenz LT22-356 DB Bedienungsanleitung

Select Autoposition item by using " " or " " buttons. Press
"OK" or " ", " " button.
Warning : Please ensure auto adjustment is performed with
a full screen image to ensure best results.
H (Horizontal) Position
This item shifts the image horizontally to right hand side
or left hand side of the screen.
Select H Position item by using " " or " " button. Use "
" or " " button to adjust the value.
V (Vertical) Position
This item shifts the image vertically towards the top or
bottom of the screen.
Select V Position item by using " " or " " button. Use "
" or " " button to adjust the value.
Phase
Depending on the resolution and scan frequency that you
input to the TV set, you may see a hazy or noisy picture
on the screen. In such a case you can use this item to get
a clear picture by trial and error method.
Select Phase item by using " " or " " buttons. Use " " or
" " button to adjust the value.
Dot Clock
Dot Clock adjustments correct the interference that appear
as vertical banding in dot intensive presentations like
spreadsheets or paragraphs or text in smaller fonts.
Select Dot Clock item by using " " or " " buttons. Use "
" or " " button to adjust the value.
PC Picture Menu
For adjusting PC picture items, do the following:
Press " " or " " button to select the second icon. PC Picture
menu appears on the screen.
Brightness, Contrast, Colour and Colour Temperature
settings in this menu are identical to settings defined in TV
picture menu under "Analogue TV Menu System".
Note : If you set Colour Temp as User, you can define R, G, B
settings manually.
Sound,Feature and Source settings are identical to the settings
explained in Analog Tv menu system.
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 55 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 55

Displaying TV Information

Programme Number , Programme Name , Sound Indicator
and Zoom Mode information is displayed on the screen
when a new programme is entered or "INFO" button is
pressed.

Mute Function

Press " " button to disable sound. Mute indicator will be
displayed in the upper side of the screen.
To cancel mute, there are two alternatives; the first one is
pressing the " " button and the second one is increasing
the volume level.

Picture Mode Selection

By pressing PP button, you can change Picture Mode
settings in accordance with your viewing requirements.
Available options are Dynamic, Natural and Cinema.
Note: This feature cannot be set while in PC mode.

Freezing Picture

You can freeze the picture on the screen by pressing the
" OK " button on the remote control. Press the " OK " button to
freeze picture. Press again to quit freeze mode.
Note: This feature will not be available while in PC mode
or watched movie from DVI source .

Zoom Modes

You can change the aspect ratio (image size) of the TV for
viewing the picture in different zoom modes.
Press "WIDE" button to directly change the zoom mode.
Available zoom modes are listed below.
Note:
In YPbPr and HDMI modes, while in 720p-1080i resolutions, only
16:9 mode is available.
Zoom mode cannot be changed while in PC mode.

Auto

When a WSS (Wide Screen Signalling) signal, which
shows the aspect ratio of the picture, is included in the
broadcast signal or the signal from an external device, the
TV automatically changes the ZOOM mode according to
the WSS signal.
• When the AUTO mode does not function correctly due
to poor WSS signal quality or when you want to change
the ZOOM mode, change to another ZOOM mode
manually.
16:9
This uniformly stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the wide TV screen
.
English - 55 -
28.09.2009 17:59:23 28.09.2009 17:59:23