Schaub Lorenz 42LT601B Bedienungsanleitung Seite 83

Select your Country , Language and Text language
by using " " or " " and " " or " " buttons. Press
OK or RED button to continue. To cancel, press BLUE
button. The following menu will be displayed during
the automatic tuning:
After APS is fi nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
If you do not accept the locations and/or the
programme names, you can change them via the
program table.
Frequency Search
Enter the desired frequency, Modulation and symbol
rate numbers. Modulation can be set as Auto, 16QAM,
32QAM, 64QAM, 128QAM and 256QAM.
When fi nished, press OK button, and the TV will start
frequency search.
Network Search
When you select Network Search line and press OK
button, the following menu screen will be displayed
on the screen:
Select YES to continue and Network Search screen
will be displayed. Enter Start and Stop frequency
ranges that you want to search within.
• After this operation, you can set Search Step as
8000 KHz or 1000 KHz. If you select 1000 KHz, the
Tv will perform search process in a detailed way.
02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 82 02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 82
Searching duration will thus increase accordingly.
When fi nished press OK button to continue. The
process will then start.
During the Network Search, if channels that
have network search info are found, the TV will
automatically show the frequencies of those channels
and network search process will end by locating those
channels.
After search is completed, a message asking whether
to search for analogue channels appears on the
screen:
Press the OK button to search for analogue channels.
The following menu appears on the screen for
analogue channel search:
Select your Country , Language and Text language
by using " " or " " and " " or " " buttons. Press
OK or RED button to continue. To cancel, press BLUE
button. The following menu will be displayed during
the automatic tuning:
After APS is fi nalized, the programme table will appear
on the screen. In the programme table you will see
the programme numbers and names assigned to the
programmes.
If you do not accept the locations and/or the
programme names, you can change them via the
program table.
Clear Service List (*)
(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press " " or
" " button to select Clear Service List and then press
English - 82 -
27.05.2010 14:31:07 27.05.2010 14:31:07