Connecting To A Dvd Player - Schaub Lorenz 42LT601B Bedienungsanleitung

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players
may have different connectors. Please refer to your DVD player's instruction book for additional information.
Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as
illustrated below, switch to HDMI source. See, "Input Selection" section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When the connection is
made, switch to YPbPr source. See, "Input selection" section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown below.
Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.
02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 65 02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 65
REAR VIEW
English - 65 -
27.05.2010 14:30:58 27.05.2010 14:30:58