Schaub Lorenz 42LT601B Bedienungsanleitung Seite 75

Navigating the Entire Channel List
Press " " or " " button for selecting the previous or
next channel. You can press
page up or page down.
To watch a specifi c channel, highlight it using " "
or " " button and then press " OK " button, while the
"Select" item on Channel List menu is highlighted by
using " " or " " button.
Then the name and number of the selected channel
will be displayed in the top-left and top-right of
the channel display at the top-right of the screen,
respectively.
Moving the channels in the channel list
• Press " " or " " buttons to select the channel that
will be moved.
• Press " " or " " buttons to select the " Move " item
on Channel List menu.
Following OSD will be displayed next to " OK " item
to indicate that enter a number by using the numeric
buttons on the remote control and press " OK " to
confi rm.
02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 74 02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 74
P+ or P- button to move
English - 74 -
Note: If you enter the same programme number
of the channel that you want to move, ".... channel
services will be replaced. Do you want to continue?"
OSD will be displayed. Press OK to confi rm or select
"No" to cancel.
Deleting the Channels in the Channel List
• Press " " or " " button to select the channel that
will be deleted.
• Press " " or " " button to select the "Delete'' item
on Channel List menu. As seen on Channel List
menu, OK is displayed next to Delete item at the
bottom of the screen to indicate that you must press
the OK button to delete the highlighted channel in
the channel list.
Press the OK button to delete the highlighted channel
in the channel list. Then the message below appears
on the screen:
Press " " or " " button to highlight the desired option.
If OK button is pressed while " Yes " is highlighted, the
highlighted channel is deleted. Selecting " No " cancels
the deletion.
Renaming Channels
To rename a specifi c channel, the channel must
be highlighted by pressing " " or " " button. Then
highlight the Edit Name item by pressing " " or "
" button as illustrated below. Press the OK button to
activate the rename feature.
27.05.2010 14:31:02 27.05.2010 14:31:02