Install Menu - Schaub Lorenz 42LT601B Bedienungsanleitung

Swap
Select Swap item by using " " or " " button. Use "
" or " " button to set. This function enables to swap
between the main and the PIP picture.
Note : See Appendix E for all
Sleep Timer
Press " " or " " button to select Sleep Timer . Use
" " or " " button to set the Sleep Timer.
The timer can be programmed between Off and 120
minutes in steps of 10 minutes.
If Sleep Timer is activated, at the end of the selected
time, the TV goes automatically to standby mode.
Child Lock
Press " " or " " button to select Child Lock .
Use " " or " " button to set the Child Lock On or Off .
When On is selected, the TV can only be controlled
by the remote control handset. In this case the control
panel buttons (except for the STANDBY button) will
not work.
Hence, if one of those buttons is pressed, Child Lock
On will be displayed on the screen when the menu
screen is not visible.
Language
Press " " or " " button to select Language . Use "
" or " " button to select the Language .
Default Zoom
While zoom mode is set as AUTO , the TV will set
the zoom mode in accordance with the signal of
the broadcast. If there is no WSS or aspect ratio
information, the TV will then use this setting to adopt.
Press " " or " " button to select Default Zoom . You
can set Default Zoom to
14:9 by pressing " " or " " button.
Blue Background
If the signal is weak or absent, the TV will automatically
change to a blue screen. To enable this, set Blue
Background to On .
By pressing " " or "
Background . Press " " or " " button to set Blue
Background as On or Off .
Menu Background
Press " " or " " button to select Menu Background .
You can set menu background level by pressing "
" or " " button.
Backlight
This setting controls the backlight level. Select
Backlight by pressing " " or " " button. Press"
" or " " button to set Backlight to Auto, Medium ,
Maximum or Minimum
02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 89 02_[GB]_SSM_MB35_42742W_3910UK_IDTV (DVB-TC)-PANEU_100HZ_SILVER1_10068848.indd 89
PIP/PAP modes.
Panoramic , 16:9 , 4:3 or
" button, select Blue
.
English - 89 -
Menu Timeout
To set a specifi c display timeout for menu screens,
set a value for this option.
Press " " or " " button to select Menu Timeout . Use
" " or " " button to change menu timeout to 15 sec ,
30 sec or 60 sec .
Teletext Language
Press " " or " " button to select Teletext Language .
Use " " or " " button to change Teletext Language to
West, East , Turk/Gre , Cyrillic, Arabic or Persian .
HDMI PC Full Mode (optional)
If you want to view PC screen in HDMI mode by using
external connection, HDMI PC FULL MODE option
should be On to adjust the screen ratio correctly. This
item might be inactive in some resolutions.
Note: If you connect an HDMI device and switch the
TV to HDMI mode, this feature will be visible (except
for 1080i/1080P resolution).
Full Mode (optional)
If you connect a device via HDMI or YPbPr connectors
and set 1080i/1080P resolutions, Full Mode item will
be visible.You can set Full Mode as 1:1 or Normal
by using " " or " ".If you select 1:1, screen ratio will
be adjusted correctly. If you set Normal, screen ratio
may expand.
Ext Out
Press " " or " " button to select Ext Out. Use " " or
" " button to set the Ext Out as On or Off.
Note :
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
"On" to EXT Out from feature menu.

Install Menu

Program
Press " " or " " button to select Program. Use " "
or " " button to select the program number. You can
also enter a number using the numeric buttons on the
27.05.2010 14:31:12 27.05.2010 14:31:12