Connecting The Lcd Tv To A Pc; Connecting To A Dvd Player - Schaub Lorenz LT22-356 DB Bedienungsanleitung

Connecting the LCD TV to a PC

For displaying your computer's screen image on your LCD
TV, you can connect your computer to the TV set.
• Power off both computer and display before making
any connections.
• Use 15-pin D-sub display cable to connect a PC to the
LCD TV.Use an audio cable between audio inputs of the
TV (side) and audio output of your PC to enable sound
connection.
• When the connection is made, switch to PC source. See
"Input selection" section.
• Set the resolution that suits your viewing requirements.
Resolution information can be found in the appendix
parts.
02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 40 02_MB45_[GB]_1055UK_IDTV_BRONZE11_22855W_10065354_50156390.indd 40

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you
can use connectors of the TV set. DVD players may have
different connectors. Please refer to your DVD player's
instruction book for additional information. Power off both
the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect
via HDMI. When you connect to DVD player as illustrated
below, switch to HDMI source. See, "Input Selection"
section.
• Most DVD players are connected through COMPONENT
SOCKETS. YPbPr can be use only when you connect a
device that has a YPbPr output through the PC input with
YPbPr to PC cable. To enable sound connection, use AUDIO
IN located side of the TV (YPbPr cable is not supplied).
. When the connection is made, switch to YPbPr source. See,
"Input selection" section.
• You may also connect through the SCART socket. Use a
SCART cable as shown below.
Note : These methods of connection perform the same function but
in different levels of quality. It is not necessary to connect by all
three methods.
English - 40 -
28.09.2009 17:59:13 28.09.2009 17:59:13