About This Documentation; Required And Supplementary Documentation; Presentation Of Information; Warnings - Emerson AVENTICS AV03 Montageanleitung

D
1
Fig. 16: Assembling the AV-BP series valve system
Fig. 17: Sealing for transition plate connection
Fig. 18: Sealing of valve system with small and large opening in the mounting
plate, direct connection
Fig. 19: IO-Link pin assignment M12 plug (male), 5-pin, A-coded
AVENTICS™ AV03/AV05 | R412018507-BAL-001-AJ | English
2 1
3 5 4
SW3
A
M = 2,5 Nm
D
Fig. 20: Operating the manual override: (A) press and turn, (B) press

2 About this Documentation

These instructions contain important information on the safe and appropriate as-
sembly, operation, and maintenance of the product and how to remedy simple
malfunctions yourself.

2.1 Required and supplementary documentation

• "Notes on Safety" (R412015575)
• PIN assignment scheme (R412019225)
• Also follow the instructions for the other components
• Observe the system documentation from the system manufacturer.

2.2 Presentation of information

2.2.1 Warnings

In this document, there are warning notes before the steps whenever there is a
danger of personal injury or damage to equipment. The measures described to
avoid these hazards must be followed.
Structure of warnings
Structure of warnings
Hazard type and source
Consequences
• Precautions
Meaning of the signal words
Meaning of the signal words
Possible dangerous situation.
Failure to observe these notices may result in minor injuries or damage to
property.
Possibility of damage to property or malfunction.
Failure to observe these notices may result in damage to property or malfunc-
tions, but not in personal injury.

2.2.2 Symbols

If this information is disregarded, the product cannot be used or oper-
ated optimally.
B
SIGNAL WORD
CAUTION
NOTICE
24