Initial Use; Setup; Operation; Weighing Items - Silvercrest SNAW 1000 C1 Bedienungsanleitung

Initial use

GB
IE

Setup

Operation

Weighing items

8
■ Remove all packaging materials from the appliance. Remove the protective
foil from the display
plate from being pushed down must be removed from under the weigh-
ing plate .
■ Open the battery compartment
the small plastic strips which are clamped between the batteries and the
contacts. Close the battery compartment
compartment cover audibly engages.
■ The scale can display weights in g (grams) / kg (kilograms) or oz (ounces)/
lb (pounds). You can set the unit on the rear of the appliance. Press the
unit switch on the rear of the device to change units. In these operating
instructions, g (grams) is always the unit shown as an example.
Place the scales on a level and heat-resistent surface. A firm standing is the
prerequisite for correct measurement.
NOTICE
► This appliance is equipped with non-slip rubber feet. As furniture surfaces
may be made of a variety of materials and are treated with many different
types of cleaning agents, it cannot be completely ruled out that some
substances contain ingredients which may corrode the rubber rests and
soften them. If possible place an anti-slip material under the feet of the
appliance.
1) Press the button ON/OFF/TARE
The start display appears briefly, then "0 g" appears automatically.
IMPORTANT
Overloading or improper loading lead to irreparable damage
to the appliance.
► NEVER place more than 5000 g (11 lb) on the weighing plate
► Do not place objects or foodstuffs on the display
. The transport restraint that prevents the weighing
on the underside of the scales and remove
afterwards, such that the battery
to switch the scales on.
.
or on the buttons.
SNAW 1000 C1