Data Cable Connection - VESTEL EVC04 Seriel Installationsanleitung

2.6.1 - DATA CABLE CONNECTION

1- Remove rubber cork.
2- Insert cable through the cable hole.
3- Insert the cable through the RCCB housing holes.
4- Finally, to connect the wires on mainboard, check the following sections in 2.6 and 2.7 depending
on the function(s) to be used.
IG v7.3.0 2020
1
3
© 2020 Vestel - All rights reserved
2
Figure-15
1
3
English - 21