Drill Safety Warnings - Meister MAS18MZ Originalbetriebsanleitung

avoid contact. If contact acci­
dentally occurs, flush with water.
If liquid contacts eyes, addition­
ally seek medical help. Liquid
ejected from the battery may
cause irritation or burns.
e Do not use a damaged or mod­
ified battery. Damaged or modi­
fied batteries may behave unpre­
dictably and lead to fire, explosion
or personal injury.
f Do not expose a battery to fire
or high temperatures. Fire or
temperatures over 130 °C can
cause an explosion.
g Follow all charging instructions
and never charge the battery
or the cordless tool outside the
temperature range specified
in the operating instructions.
Incorrect charging or charging
outside the permitted temperature
range can destroy the battery and
increase the risk of fire
6 Service
a Have your power tool serviced
by a qualified repair person
using only identical replacement
parts. This will ensure that the
safety of the power tool is main­
tained.
b Never service damaged bat­
teries. All battery maintenance
should be performed by the man­
ufacturer or by authorised service
centres only.

7.1.1 Drill safety warnings

a Use auxiliary handle(s), if sup­
plied with the tool. Loss of con­
trol can cause personal injury.
MW-5451340-Bedien-1908.indd 59
b Hold power tool by insulated grip­
ping surfaces, when performing
an operation where the cutting
accessory may contact hidden
wiring or its own cord. Cutting
accessory­contacting­a­„live"­wire­
may make exposed metal parts of
the­power­tool­„live"­and­could­give­
the operator an electric shock.
7.1.2 Safety precautions when
using long drills
a Never work with a speed higher
than the maximum permitted
speed for the drill. When using
with higher speeds, the drill may
bend easily if it is able to rotate
freely without contact with the
workpiece, and result in injuries.
b Always start the drilling process
with a low speed and with the
drill in contact with the work­
piece. When using with higher
speeds, the drill may bend easily
if it is able to rotate freely without
contact with the workpiece, and
result in injuries.
c Do not exert excess pressure
and only place pressure in a
longitudinal direction to the drill.
Drills may bend, and break, as a
result or lead to a loss of control
and to injuries.
7.2 Screwdrivers safety warnings
a Hold power tool by insulated
gripping surfaces, when per­
forming an operation where the
fastener may contact hidden
wiring or its own cord. Fasteners
contacting­a­„live"­wire­may­make­
exposed metal parts of the power
tool­„live"­and­could­give­the­oper­
ator an electric shock.
59
12.09.19 08:44