Adjusting The Seat Depth - Vermeiren V100 Gebrauchsanweisung

N
Bushing
5. Screw the swivel axles of the front wheels loose.
6. Place the bushings according table 2.
7. Install the swivel axles of the front wheels and tighten them. Check the tension in the
swivel axle so it turn smoothly, but there is no space for motion.
8. Mount the rear wheels.
9. If installed properly the swivel axles of the front wheels and the ground must be
perpendicular. Check this.
10.
Adjust the brakes according § 3.5.
3.4

Adjusting the seat depth

The Vermeiren V100 is adjustable in 2 seat depths by changing the cross.
Hole 1
Castor stem housing
Bushing
Seat depth
450 mm (17.72 in.)
430 mm (16.93 in.) (Standard)
Hole 2
Hole 4
Cross
Castor stem housing
Cross
Hole 1 and 3
Hole 2 and 4
Table 3: Seat depth
Change the seat depth according the
following steps:
1.
Remove both clips
2. Move the cross in the desired position
(see table 3).
3. Replace both clips
Page 16
V100
2011-01
Castor stem housing
Bushing

.

.