Technical Data - simu SIMUDRIVE SD100hz Installationsanleitung

SIMUDRIVE SD100Hz

12 TECHNICAL DATA

GENERAL CHARACTERISTICS
Power supply
Maximum motor output
Motor safety fuse
Operating climate conditions
Radio frequency
Number of channels that can be memorised
Electrical insulation
Programming interface
CONNECTIONS
Programmable safety inputs
Wired control input
Auxiliary output
Accessories power supply output
Safety edge output
OPERATION
Forced operating mode
Independent remote lighting control
Lighting time delay (after movement)
Automatic closing mode
Orange light warning
220-230 Vac - 50/60 Hz
1100 W - 230 Vac
5 AT - 250 V
- 20°C / + 60°C - IP 44
433.42 MHz, < 10 mW
40
Category 1
4 buttons – 10 indicator lights
Dry contact: NC
TX/RX photoelectric cells - Reflex cell
Dry contact: NO
Programmable orange light or remote lighting
Orange light 230 Vac auto-flashing
Offset lighting Dry contact
Max. 230 V - 500 W
either 5 fluocompact or LED lights
or 2 power supplies for low-voltage LEDs
or 1 halogen light, max. 500 W
24 Vdc - 200 mA
Optical wired or resistive wired 1.2 kΩ/8.2 kΩ
By pressing the "+" and "-" buttons in motor setting
mode
Yes
60 s
Yes
2 s
EN
41