Connecting Peripherals; General Wiring Diagram; Description Of The Various Peripherals - simu SIMUDRIVE SD100hz Installationsanleitung

SIMUDRIVE SD100Hz
5

CONNECTING PERIPHERALS

WARNING
The connection operations must be performed with the power off.
5.1

General wiring diagram

> Illustration 13
Terminals Connection
1 N 230 V power supply
2 L
3 Earth
4 Earth Motor
5 L2
6 N
7 L1
8 Aux Orange light
9 Area lighting
10 Stop Fall protection - NC contact
11
12 - Safety edge
13 +
14 Dry
15 - 24 V accessories power supply
16 +
17 Tx - Power supply for photoelectric
cell transmitter for auto-test
18 Dry Safety test output
test.
19 Cell Photoelectric cell receiver power
supply
20 Shared
21 Start Wired control
22 Ant Antenna core
23 Antenna earth
5.2

Description of the various peripherals

5.2.1 Photoelectric cells
> Illustration 14
WARNING
It is compulsory to install photoelectric cells WITH AUTOTEST P3 = 2 if:
• remote control of the automatism is used when the door is not visible,
• automatic closing is activated ("P0" = 2 or 3).
Comments
230 V - 25 W orange light
230 V - 500 W area lighting maximum:
• either 5 fluocompact or LED lights
• or 2 power supplies for low-voltage LEDs
• or 1 halogen light, max. 500 W
Compatible with hard-wired safety edge:
• Resistive 1.2 kΩ or 8.2 kΩ
• Optical
EN
33