General Information; Installation - Victron energy BlueSolar PWM 12V/24V-30A Anleitung

Always connect the batteries first.
•
•
•

1. General Information

The BlueSolar Charge Controller series uses Pulse Width Modulation (PWM) charge
voltage control combined with a multistage charge control algorithm.
2. Features
• Three stage battery charging [bulk – absorption – float]
Battery type: Lead-ACID and LiFePO4 (with internal BMS)
•
Protected against over current.
•
Protected against short circuit.
•
Protected against reverse polarity connection of the solar panels and/or battery.
•
• Low voltage load disconnect.
• Temperature protection.

3. Installation

Important note: Always connect the batteries first.
Downloaded from www.Manualslib.com
Use for 12V battery system only 12V (36 cells) solar panel array.
Use for 24V battery system only 24V (72 cells) solar panel array.
Use for 48V battery system only 2x24V (72 cells) solar panel
array in series.
3
manuals search engine
IMPORTANT