Victron energy BlueSolar PWM 12V/24V-30A Anleitung Seite 10

Press on the MENU
key again and you go
to:
8
Downloaded from www.Manualslib.com
Load current display. It shows load current and battery
capacity.
Press MENU
USB Voltage display. It shows the USB voltage
5V (2A max)
Press MENU
Controller temperature display. If the controller
overheats it will automatic shut down and wait for the
temperature to drop to normal level and then it will start
again.
Press Press MENU
manuals search engine
10s and measure again to
make sure night falls. The
factory setting is 10sec
Short-circuit protection
setting.
Some inductive or capacitive
consumer will trigger the short-
circuit protection during start
up. Therefore the SC-
protection can be disabled
manually. Sc.F=OFF,
Sc.n=ON. The default is ON.
The factory setting is Sc.n.
to enter next display.
to enter next display.
to enter Main display.