Victron energy BlueSolar PWM 12V/24V-30A Anleitung Seite 7

4. LCD DISPLAY and SETTINGS
MENU：switch between different display, or to enter/exit setting by long press.
UP：press to change the settings when in setting mode.
DOWN: press to change the settings when in setting mode.
Load on/off button when in H mode.
4.1 Monitoring & Settings
Values between [ ] are for 24V battery settings. Bolt are the 48V settings.
Downloaded from www.Manualslib.com
Boot Display. After connecting the batteries, you see the type
of charger and the measured battery voltage.
1230= BlueSolar Charge Controller – LCD – USB 12V|30A
2430= BlueSolar Charge Controller – LCD – USB 24V|30A
4810= BlueSolar Charge Controller – LCD – USB 48V|10A
4820= BlueSolar Charge Controller – LCD – USB 48V|20A
4830= BlueSolar Charge Controller – LCD – USB 48V|30A
Press MENU
5
manuals search engine
to enter next display.