Atag MX4570G Bedienungsanleitung Seite 106

USING YOUR APPLIANCE
1 2
W
4
3
5
6
EN 10
When these steps have been completed, the oven heats up.
A series of beeps sound when the oven has reached the desired
temperature.
At the end of the (programmed) cooking time:
• the oven stops,
• display flashes,
• a series of beeps are emitted for a few minutes. The beeps can be
stopped by pressing any button.
Note
All cooking is done with the door closed. After a cooking cycle, the
cooling fan continues to run for a time, in order to guarantee optimum
oven reliability.
Cooking with delayed start and selected end of cooking time
Proceed as for programmed cooking.
• Press the time button.
The end of cooking time symbol flashes to indicate that it may now
be set.
• Turn the knob to set the end of cooking time.
Example: end of cooking time 13:30 p.m.
• Press the knob to confirm.
The end of cooking time will automatically be saved in the
appliance's memory after a few seconds.
The end of cooking time display stops flashing.
The display returns to the time of day.
An animated display indicates that the oven is in delayed cooking
mode.
The light inside the oven comes on when cooking starts and goes
out at the end of cooking.
Once these 3 steps have been completed, the oven heating start time
is delayed so that cooking ends at 13:30.
If the oven door is opened, please press the knob again to confirm the
delayed start.
At the end of the (programmed) cooking time:
• The oven stops and the cooking time symbol and 0:00 flash.
• A series of beeps are emitted for a few minutes. The beeps can be
stopped by pressing any button.