Overview - Bosch MUM44 Serie Gebrauchsanleitung

W Caution!
We recommend that the appliance is never switched on for longer
than is necessary to process the ingredients. Do not operate
at no­load.
W Important!
It is essential to clean the appliance thoroughly after each use or
after it has not been used for an extended period (X "Cleaning and
servicing" see page 18).
W Explanation of the symbols on the appliance or accessory
i
Follow the instructions in the operating instructions.
Y
Caution! Rotating blades.
W
Caution! Rotating tools.
Do not place fingers in the feed tube.
Congratulations on the purchase of
your new Bosch appliance. You can find
further information about our products
on our web page.
Contents
Intended use .............................................13
Important safety information .....................13
Overview...................................................15
Operating positions...................................16
Operation ..................................................17
Cleaning and servicing .............................18
Troubleshooting ........................................19
Application examples................................19
Standard / optional accessories ...............20
Disposal ....................................................21
Guarantee.................................................21
Important safety information
The operating instructions describe
several models. The appliance requires
no maintenance.

Overview

Please fold out the illustrated pages.
X Figure A
Base unit
1 Release button
2 Swivel arm
(see "Operating positions")
3 Rotary switch
P = Stop
Ö = Parking circuit
Hold rotary switch until the drive stops;
tool is in the swivel position. If the drive
does not move, the swivel position has
already been reached.
Settings 1-4 = Operating speed
1 = Minimum speed - slow
4 = Maximum speed - fast
If the power is interrupted, the appliance
remains switched on and restarts when
the power is restored.
4 Drive cover
To remove the drive cover, rotate until
the locking feature has been released.
en
15