Transferring Data - Fora Diamond GD50 Bedienungsanleitung

Blutzucker-überwachungsssystem

Inhaltsverzeichnis

Verfügbare Sprachen

(100 mg/dL = 5.5 mmol/L; 200 mg/dL = 11.1 mmol/L)

To review the day-average test results, do the following:

1. Press and hold MAIN for 3 seconds until the "

appears. Release MAIN and then your 7-day average result

measured in general mode will appear on the display.

2. Press MAIN to review 14, 21, 28, 60 and 90-day average

results stored in each measuring mode in the order of Gen,

AC, then PC.

(100 mg/dL = 5.5 mmol/L)

Note:

• Press and hold MAIN for 5 seconds to exit the memory

mode or leave it without any action for 3 minutes. The

device will turn off automatically.

• If using the device for the first time, the "---" icon will appear

when you recall the test results or review the average result.

This indicates that there is no test result in the memory.

• Control solution results are NOT included in the day

average.

Announcement of Memory Result by

Universal Tone

Only the most recent result that was saved can be announced

acoustically. If you press MAIN to turn the meter on, you will

first hear the Long-Beep which stands for power-on and then

the most recent result.

" icon

Only the average for the last 7 days is announced acoustically.

If the 7-day average cannot be calculated, three horizontal

bars are displayed. This is signaled acoustically with 3 long

beeps representing 3 zeroes.