Use; Switching On And Off; Selecting Oscillation Speed; Maintenance And Cleaning - Parkside PAMFW 20-LI A1 Originalbetriebsanleitung

Use

Switching on and off
Switching on
♦ Push the ON/OFF switch
the appliance on.
The LED work light
appliance is switched on to light up the working
area in low light conditions.
NOTE
► The LED work light
the dust extraction unit
Switching off
♦ Push the ON/OFF switch
switch the appliance off.

Selecting oscillation speed

♦ Use the speed adjustment wheel
required oscillation speed.
Level 1: low speed
Level 6: high speed
NOTE
► The required speed depends on the material
being worked and on the working conditions
and can be determined through practical tests.
│ GB │ IE
■ 24
forwards to switch
lights up when the
can only be used when
is not fitted.
backwards to
to set the

Maintenance and cleaning

WARNING! RISK OF INJURY! Always
switch the appliance off and remove
the battery before carrying out any
work on the appliance.
■ Do not use any sharp objects to clean the
appliance. Do not allow any liquids to get into
the appliance. This can damage the appliance.
■ Clean the appliance regularly, preferably
immediately after completion of the work.
■ Use a soft, dry cloth to clean the housing.
Never use petrol, solvents or cleansers which
can damage plastic.
■ A vacuum cleaner is required for thorough
cleaning of the appliance.
■ Ventilation openings must never be obstructed.
■ Remove any sanding dust stuck to the appliance
with a brush.
■ If a lithium-ion battery is to be stored for an
extended period, the charge level should be
checked regularly. The optimum charge level is
between 50% and 80%. The optimum storage
environment is cool and dry.
NOTE
► Replacement parts not listed (such as carbon
brushes, switches and replacement batteries)
can be ordered via our service hotline.
PAMFW 20-Li A1