Introduction; Intended Use; Features; Package Contents - Parkside PAMFW 20-LI A1 Originalbetriebsanleitung

CORDLESS MULTI-PURPOSE
TOOL PAMFW 20-Li A1

Introduction

Congratulations on the purchase of your new appli-
ance. You have chosen a high-quality product. The
operating instructions are part of this product. They
contain important information about safety, usage
and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the range of applications specified. Please also
pass these operating instructions on to any future
owner.

Intended use

The appliance is intended for sawing, cutting and
grinding. The following materials are preferable for
processing: wood, plastic, drywall elements, light
and non-ferrous metals, fasteners (e.g. nails, screws)
and wall tiles. It is particularly suitable for near-edge
and flush work. Any other usage or modification of
the appliance is considered improper and carries a
significant risk of accidents. Not for commercial use.

Features

Tool release lever
ON/OFF switch
Release button for battery pack
Battery pack*
Battery charge level button
Battery display LED
Speed adjustment wheel
LED work light
Tensioning screw
Dust extraction unit (2 pcs.)
Angle adapter
Scraper 52 mm
Diamond saw blade 65 mm
HCS plunge saw blade 32 mm
Sanding plate
│ GB │ IE
■ 16
High-speed charger*
Red charge control LED
Green charge control LED
Sanding sheets

Package contents

1 cordless multi-purpose tool PAMFW 20-Li A1
1 delta sanding plate
6 sanding sheets 80 mm flange
1 scraper 52 mm
1 HCS plunge saw blade 32 mm
1 diamond saw blade 65 mm
1 dust extraction unit (2 pcs.)
1 carrying case
1 set of operating instructions

Technical data

Cordless multi-purpose tool PAMFW 20-Li A1
Rated voltage
Rated idle speed
Oscillation angle
Rechargeable battery PAP 20 A1*
Type
Rated voltage
Capacity
Cells
High-speed battery charger PLG 20 A1*
INPUT
Rated voltage
Rated power
consumption
Fuse (internal)
OUTPUT
Rated voltage
Rated current
Charging time
Protection class
* BATTERY AND CHARGER ARE NOT INCLUDED
20 V (DC)
n 5000–19000 rpm
0
3.2°
LITHIUM ION
20 V (DC)
2 Ah
5
230–240 V ∼, 50 Hz
(AC)
65 W
T3.15A
3.15 A
21.5 V (DC)
2.4 A
approx. 60 min
II / (double insulation)
PAMFW 20-Li A1