Introduction; Intended Use; General Description; Scope Of Delivery - Parkside PKGA 20-Li C2 Originalbetriebsanleitung

Introduction

Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product. During production,
this equipment has been checked for
quality and subjected to a fi nal inspection.
The functionality of your equipment is
therefore guaranteed.
The operating instructions constitute
part of this product. They contain
important information on safety, use
and disposal.
Before using the product, familiarise
yourself with all of the operating and
safety instructions. Use the product only
as described and for the applications
specifi ed. Keep this manual safely and in
the event that the product is passed on,
hand over all documents to the third party.

Intended Use

The device is intended for tightening and
releasing screws and for drilling holes in
wood, metal or plastic.
The device is not suitable for commercial
use. Any other use that is not explicitly
approved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The equipment is designed for use by
adults. Adolescents over the age of 16
may use the device only under supervision.
The manufacturer is not liable for damages
caused by unspecifi ed use or incorrect
operation. Commercial use will invalidate
the guarantee.
The device is part of the Parkside
X 20 V TEAM series and can be operated
using Parkside X 20 V TEAM series
batteries.
The batteries may only be charged using
chargers from the Parkside X 20 V TEAM
series.

General Description

The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.

Scope of delivery

Carefully unpack the trimmer and check
that it is complete. Dispose of the packag-
ing material correctly.
• Motor unit with drill attachment
• Sabre saw attachment
• Multi-sander attachment
• Multifunction tool
• Accessories for drill attachment
- 6 drill bits (1,5/2/3/4/5/6 mm)
- 6 screwdriver bits, 50 mm
- Bit holder
• Accessories for sabre saw attachment
- Wood sawblade (HCS150/6TPI)
- Metal sawblade (HSS150/18TPI)
• Accessories for multi-sander attachment
- 5 sanding sheets
(2 x P* 60, 2 x P 120, 1 x P 240)
• Accessories for multifunction tool
- Plunge sawblade
- Scraper blade
- Delta sanding plate with 3 sanding
sheets (1 x P* 60, 1 x P 80, 1 x P 120)
• Storage case
• Instruction Manual
Battery and charger are not
included.
GB IE
*P = Grain size
27