JUMO dTRANS T04 Betriebsanleitung Seite 47

The PC setup program is used for configuration and fine adjustment
of the transmitter from a PC (e.g. when the sensor drifts).
Connection is through the PC interface with TTL/RS232 converter
and adapter and the setup interface of the transmitter. In order to
configure the transmitter, it has to be connected to the supply
voltage.
H
Downloaded from www.Manualslib.com
3 PC setup program
If you want to operate the transmitter with the setting that
was transferred through the PC setup program, all DIP
switches must be set to off.
If you want to use a configuration that is available in the
transmitter, the measuring range as well as input and output
have to be set via the DIP switches.
manuals search engine
11