cecotec CONGA WinDroid 970 Bedienungsanleitung Seite 27

1. Loop one end of the safety cable into end A on the robot power cord and tighten.
2. Connect end A and end B and tighten.
3. Loop the other end of the safety cable around the safety suction cup's channel and pull it
tight.
1.
2. 3.
If the length of the power cord restricts the robot's movement, an extension cord of the robot
can be used. Disconnect end A and end B, and connect them with both ends of the extension
cord respectively and tighten. Only one extension cord can be used with the robot.
How to use the extension cord
• Use the extension cable according to actual distance or glass size, each line is 1.5-metre long.
Please note: when operating the product outside a tall building, only 1 pcs extension cable is
suggested to be used.
• Connect two ends of extension separately to the adapter cable end and product cable end.
Tighten the screw buckles. It is suggested to use the safety tether at the same time.
Safety suction cup installation
• When you use the robot to clean an inside window: press the safety suction cup firmly on the
top corner of the inside window. Make sure the safety suction cup is attached securely in place.
• When you use the WinDroid Excellence 970 to clean an outside window: press the safety
suction cup firmly on the inside of the window being cleaned. Make sure the safety suction cup
is attached and securely in place.
Conga WinDroid 970
27