Reviewing Recorded Photos Or Videos - SecaCam Wild-Vision Full HD 5.0 Bedienungsanleitung

5. Reviewing photos or videos
Note: Depending on the „mode" setting either a photo or a video is re-
corded. In the video mode the recording is stopped by pressing the „OK"
button a second time.
The manual activation is especially recommended for testing the range of the
LED flash during night time photos or videos. Activate a manual recording
in the dark. Take a photo with 19 and then with the full 40 LEDs. You can
then decide whether the flash mode "19" or "40" is best for your individual
situation.

7. Reviewing recorded photos or videos

1. ON: Set the switch to "ON"-position.
OK:
2. Press the "OK" button – the LCD color display will turn on and
show the memory card capacity and the remaining available memo-
ry for about 2 seconds. After that, the screen displays the current
image section. In the top right corner of the display the number of
shots made as well as the theoretically possible number of shots is
displayed.
Example: 00004/01392 (4 shots out of 1,392 total possible photos)
3. Top arrow button:
back mode. The last recorded photo or video will appear.
Right arrow button = forward
4.
Left arrow button = backward
Use the left and right arrow button to navigate through the images
or videos. A video is indicated by the black bars above and below.
To start playing a video, press the „OK"-button.
Deleting a photo/video: Select a photo or video with the right and left arrow
buttons as mentioned
can choose between „delete" and „format". After selecting „delete" you can
choose between „one" and „all".
Caution: The confirmation of „all" will irretrievably delete all existing recor-
dings on the memory card!
Press the top arrow button to change the play-
above. Press the „M" button to display the menu. You
Wild-Vision
51