Herunterladen Diese Seite drucken

LGB 55015 Bedienungsanleitung Seite 6

Vorschau ausblenden Andere Handbücher für 55015:

Werbung

8
51070 und 55050
Anschluss des Universal-Handys an den analogen
Fahrregler 51070
Um das Universal-Handy hier einsetzen zu können
benötigen Sie zwingend die LGB-Funkfernsteuerung
55050/55055.
Lesen Sie hierzu den folgenden Abschnitt.
Einsetzen des LGB-Funkfernsteuerung-
Senders 55050
Für den Einsatz mit Funkfernsteuerung müssen Sie
Ihr Universal-Handy mit einem RC-Sender 55050
1
ausrüsten.
Drücken Sie auf die beiden geriffelten Laschen
1
am Kopfteil des Universal-Handys und ziehen Sie
das Kunststoffteil mit Kabel vorsichtig heraus.
Setzen Sie in das nun offene Kopfteil den RC-
2
Sender 55050 ein.
Beschädigen Sie dabei nicht die Antenne.
51070 and 55050
© DiskArt™ 1988
Connecting the Universal Remote
to the 51070 Analog Throttle
To use the Universal Remote in this setting, you must
obtain the LGB radio control 55050/55055.
For more information, read the following paragraph.
Inserting the 55050/55051 LGB Wireless
Transmitter
For wireless operation, you have to equip your Universal
Remote with a 55050/55051 Wireless Transmitter.
Press both textured clips at the top of the remote
1
inward and carefully pull out the plastic insert.
Slide the 55050/55051 Wireless Transmitter into
2
the remote.
Do not damage the antenna while doing this.
51070 et 55050
Raccordement de la télécommande universelle à la
commande analogique 51070
Vous devez utiliser l'ensemble émetteur/récepteur
sans fil 55050/55055 pour pouvoir utiliser la
télécommande universelle avec la commande
analogique 51070. Pour de plus amples
renseignements, se reporter au paragraphe suivant.
Installation de l'émetteur sans fil LGB 55050/55051
Pour la configuration commande sans fil, il est impératif
d'installer un émetteur sans fil 55050/55051 sur la
télécommande universelle.
Déplacer les deux boutons en relief situés à la
1
partie supérieure de la télécommande vers l'intérieur
et sortir l'insert plastique avec précaution.
Enficher l'émetteur sans fil 55050/55051 dans la
2
télécommande.
Faire très attention à ne pas endommager l'antenne
pendant l'opération.
2
9

Werbung

loading