Yamaha ATS-CU2070 Bedienungsanleitung Seite 27

7
DIMMER key
Change the brightness of the indicators. Each time the key is
pressed, the brightness of the indicators changes as follows.
Dim (default setting) → Off → Bright
↑
Indicators glow brightly just after operation and change to the
specified brightness after a few seconds.
Decoder indicator
The unit supports the following audio signals. The color of the
indicator identifies the type of audio input signal.
Green (Dolby Digital), Red (DTS)
Off (PCM/analog signal/no input signal)
27
En