Yamaha ATS-CU2070 Bedienungsanleitung Seite 21

NOTE
Audio Return Channel (ARC) supported TV
• Connect an HDMI cable to the audio return channel supported jack (the jack with
"ARC" indicated) on TV.
• Once the HDMI control function has been activated, video and audio content from
playback devices can be output from the TV even when this unit is off (HDMI signal
pass-through).
• Enable the HDMI control function of this unit to activate the Audio Return Channel
(ARC) (p. 32).
What is Audio Return Channel (ARC)?
In order for the unit to play audio from a TV, the TV must usually be
connected to the unit via an audio cable as well as an HDMI cable.
If, however, the TV supports Audio Return Channel (ARC), TV
audio signals can be input to the unit via the HDMI cable that
outputs video signals from the unit to the TV.
b
Connecting a game console via the
analog jack
Connect an external device, such as a game console or TV that does
not have an optical digital audio output, to the ANALOG input jack of
the center unit.
Analog audio cable
(RCA plug (L/R)-
3.5 mm mini plug
cable; supplied)
Game console
CAUTION
• If volume can be adjusted on the device connected to the
unit's ANALOG input jack, set that device's volume to the
same level as that of other devices connected to the unit's
HDMI jacks to prevent volume from being louder than
expected.
ANALOG
21
En