Klarstein Metrobreeze Miami Handbuch Seite 29

Setting the TIMER
You can use the timer to set the time to automatically switch on or off.
Setting the auto power on time
If you have activated the corresponding timer, the unit switches on after the time you
have set. When you press the TIMER button in standby mode, the timer indicator
blinks. The time of the timer can be adjusted by pressing the (+) and (-) buttons (in
1-hour increments). You can set a time interval between 1 ~ 24 hours. Finally, press
the TIMER button again to activate the timer. The timer indicator light will then light
continuously. The remaining time is displayed on the screen.
• The unit will automatically start operating as soon as the timer's automatic switch-
on time has elapsed.
• To cancel the timer function, press the TIMER button again.
• If you press the ON/OFF button before the timer has expired, the timer function
is canceled and the unit turns on and starts operation.
Setting the auto power off time
If this timer has been activated, the unit will automatically turn off as soon as the time
you set has elapsed. When you press the TIMER button in the operating mode, the
timer indicator flashes. The time of the timer can be adjusted by pressing the (+) and
(-) buttons (in 1-hour increments). You can set a time interval between 1 ~ 24 hours.
Finally, press the TIMER button again to activate the timer. The timer indicator light will
then light continuously. The remaining time is displayed on the screen.
• The unit turns off automatically when the set time has elapsed.
• Press the TIMER button again to cancel the timer function.
• If you press the ON/OFF button before the timer has expired, the timer function
will be canceled and the unit will turn off and stop operation.
SWING button (Swing Function)
To start the oscillation function, press the SWING button to move the unit from right to
left. Press the button again to cancel the function.
EN
29