Cleaning And Care - Klarstein Metrobreeze Miami Handbuch

Temperature display
Press the (+) and (-) buttons simultaneously to switch between Fahrenheit and Celsius.
Cooling and dehumidifying precautions
• When using the cooling and dehumidifying mode, be sure to wait at least 3 minutes
after turning off the unit before turning it on again.
• Make sure that the mains voltage corresponds to the voltage indicated on the
nameplate.
• The outlet must be suitable for AC power.
• Make sure that you connect only this device and no other devices to the socket.
„Water tank full" alarm
When the water tank is full, the corresponding indicator light will illuminate and the unit
will beep 5 times. E3" is displayed on the screen and the compressor automatically
stops. The drain plug can now be removed and the water drained through the drain
hose. The unit will then automatically resume normal operation.

CLEANING AND CARE

• Switch off the appliance before cleaning and unplug the appliance from the wall
outlet.
• Do not use gasoline or other chemicals to clean the product.
• Do not wash the appliance directly.
• If the unit is damaged, contact customer service.
Cleaning the Air Filter
• The air filter can be blocked by dust/protection and should be cleaned once every
two weeks.
• Open the ventilation grille and remove the air filter.
• Clean the air filter with a neutral detergent and lukewarm water. Then dry the filter
in the shade.
• Replace the air filter and all other components.
Cleaning the unit surface
Clean the unit surface with a neutral detergent and a damp cloth. Then rub the device
surface dry with a dry cloth.
EN
31