Checking The Fuses In The Charging Station; Storage And Maintenance - ZAPTEC Pro Bedienungsanleitung

Checking the Fuses in the Charging Station

1. Remove the front cover using the special tool (SmartKey) supplied with the charging station, and
take off the front cover.
2. Check that the fuses in the fuse window have not tripped (they should all face upwards).
3. If any of the fuses have tripped, remove the fuse cover and flip the fuses up again. Fit the fuse
cover as in step 2 and attach the front cover again.
* If the charging station is mounted on a ZAPTEC Column, use SmartKey Column (supplied with the charging
column) to open the charging station.
1

Storage and Maintenance

The product must be kept in a dry room with a stable temperature. The protective cover should
always be on if the product is not in use.
The following periodic maintenance is recommended:
• Wipe down the charging station with a damp cloth.
• Check that the charging connector is free of all foreign materials.
• Check that the charging station has no external, physical damage.
In the case of publicly accessible installations, an annual inspection must be carried out by qualified
personnel in accordance with Norwegian legislation and regulations. (Ref. NEK400)
14
2 3