Maintenance; Safety Harness - Chicco KWIK.one Handbuch

stroller knows how to do it in the
safest way.
• This product must only be used by
an adult.
• The product must be assembled by
an adult.
• To avoid all strangulation risks, never
give children objects with cords or
strings attached, or leave them with
in proximity of such objects.
• Never use the stroller on staircases or
escalators: you could suddenly lose
control of it.
• Always pay attention when going
up and down steps or pavements.
• If the stroller has been exposed di-
rectly to sunlight for a long time, you
must let it cool down before placing
your child inside of it. Prolonged ex-
posure to direct sunlight may cause
the colour of the materials and fabric
to fade.
• Prevent the stroller from contact with
salty water. It might cause the forma-
tion of rust.
• Do not use the stroller on the beach.
• When unused, the stroller should be
kept out of reach of children.
TIPS FOR CLEANING AND MAINTENANCE
WARNING:
This product requires regular periodical mainte-
nance. The cleaning and maintenance of the product must
only be carried out by an adult.
CLEANING
Clean the fabric parts using a wet sponge and neutral soap.
stroller seat lining can be removed (please refer to the section
"Fitting/removing seat lining").
for instructions on how to clean the fabric parts. Below are the
cleaning symbols and their meanings:
Hand wash
30° C
Do not bleach
C
Do not tumble dry
Do not iron
Do not dry clean
Routinely wipe clean plastic parts with a soft damp cloth. Never
use solvents or abrasive detergents. Always dry the metal parts
The
Please refer to the care labels
to prevent the formation of rust if the folding cot has come into
contact with water.

MAINTENANCE

Lubricate the moving parts only if necessary, with a light applica-
tion of a silicone based lubricant. Regularly check the condition
of the wheels and, keep them clean from dust and sand. Make
sure that all plastic parts that slide on the metal tubes are clean
from dust, dirt and sand, in order to avoid frictions that may
compromise the optimal performance of the stroller. Keep the
stroller in a dry place.
WARNING:
the elements described may not be available
for some versions of this product. Please read carefully the
instructions on the accessories/components available for the
model purchased.
OPENING AND FIRST ASSEMBLY
1. Completely open the stroller frame (Fig. 1- 1A) until you
hear a click.
2 Fit the front wheels on the relevant pins of the frame (Fig. 2),
making sure that the lever of the swivel system is positioned
downward. Repeat the operation for the other front wheel.
WARNING:
Before use, ensure that the wheels are locked
correctly.
3. To assemble the wheels on the rear axle, fit the following parts
in the correct order (Fig. 3):
• wheel (A)
• washer (B)
• spring pin (C)
• plug (D)
Make sure you insert the fastening spring pin as indicated in the
diagram: the straight side must be inserted in the hole in the
pin. Repeat this operation also for the other wheel, following
the same sequence.
4. Fit the rear axle into relevant slots in the frame until you hear
it click into place (fig. 4).
WARNING:
Before using ensure that the wheels and rear axle
are correctly attached.
5. Fit the storage basket by wrapping the front straps around
the sides of the tube of the seat (fig. 5); wrap the fabric around
the rear tube and close the fasten the snap buttons along
the entire perimeter of the rear tube (fig. 5A); complete the
step by passing the rear straps in the relevant plastic slots in
the base of the rear leg tubes (5B).
6. To fit the hood, fasten the plastic clips to the frame's tubes
matching the holes in the clips with the pins on the tubes
(fig. 6), fasten the zipper to the fabric flap on the back of the
backrest (fig. 6A) and close the Velcro strap on both handle
tubes (fig. 6B).
7. Insert the bumper bar in the dedicated slots until they click
into place (Fig. 7). To remove the bumper bar, press the two
side buttons and pull towards you (Fig. 7A).
WARNING:
Never use the bumper bar to lift the stroller up
with the child sitting in it.

SAFETY HARNESS

8. This stroller has a five-point safety harness featuring two
shoulder straps, two adjustment holes, a waist strap and a
crotch strap with buckle.
WARNING:
To use it with children from birth to approx. 6 months
of age, you must use the shoulder straps by threading them first
through the two adjusting holes (fig. 8).
After laying the child in the stroller, fasten the straps (Fig. 8A)
by passing first the two forks (A) inside the shoulder strap
buckle (B) and then inside the crotch strap buckle (C);
the height of the shoulder straps so that they adhere to your
child's shoulders. Make sure that the harness straps are fitted
correctly. To unfasten the waist strap, press the central button
and pull the side prongs.
12
Adjust