Zodiac Ei2 Montage- Und Gebrauchsanleitung Seite 29

OVERHEAT-
/ ING
All the
/
setti ngs are
lost
==> If the problem continues contact your reseller
6. Product conformity
This appliance has been designed and manufactured to comply with the applicable requirements of the following stand-
ards :
EN6000-6-1: 2006
• Device internal temperature
over 70 °C.
• Device internal temperature
over 80 °C.
• The appliance no longer saves
the setti ngs (producti on level,
power, ti me, language, ti mers,
etc.)
• The device reduces its producti on to 50 %.
• Producti on stops.
• Producti on restarts automati cally when the
temperature drops.
• Check the accumulator.
• Replace if necessary ("CR2032"-type 3 V
accumulator), see "2.5.2 Connecti on to
an electric pool cover (Ei2 Expert only)" to
open and close the box.
• Reprogramme the appliance's diff erent
setti ngs, see "3.2.4 Setti ng the ti me",
"3.2.5 "Summer" and "Winter" modes and
setti ng the "Timers"", and "3.2.6 "Internal
setti ngs" menu".
EN
14