Zodiac Ei2 Montage- Und Gebrauchsanleitung Seite 25

The Ei² Expert chlorinator can store 2 seasonal operati ng modes called by default "Sum" and "Win". The following
setti ngs can be customised for each mode:
- the device operati ng ti mes, the "ti mers": T1 (Timer 1) and T2 (Timer 2)
- the required chlorine producti on rate: 10 %, 20 %, 30 %,... up to 100 %.
3.2.5.a Mode selecti on: "SUMMER" or "WINTER"
•
Press 4 ti mes to set the clock. "SUM" starts to fl ash.
•
Use the and
screen.
3.2.5.b Programming the ti mers according to the modes
The ti mes of Timers 1 and 2 cannot overlap. In additi on, the ti me range of Timer 1 necessarily precedes that of
Timer 2.
TE1 / TE2 = Timer in "summer" mode No. 1 / Timer in "summer" mode No. 2
• Press 4 ti mes to set the clock. "SUM" starts to fl ash.
• Select the mode to be customised "SUM" or "WIN" using the
move to the ti mer setti ng screen.
• Use the and
• Use the and
• Use the and
• Use the and
• Repeat the steps for Timer 2.
• Press the butt on to store the ti mers and move to setti ng the chlorine producti on rate.
•
Use the and
STANDBY = Device operati ng status
T = "Timer" mode (always acti ve)
SUM = "Summer" operati ng mode
80 % = chlorine producti on rate
14:25 = ti me in 24 h format
butt ons to choose "SUM" or "WIN" mode, then press the
08:00-12:00 = Operati ng ti me range of Timer No. 1
14:00-18:00 = Operati ng ti me range of Timer No. 2
butt ons to set the Timer 1 stop minutes, then press
butt ons to set the Timer 1 stop hours, then press
butt ons to set the Timer 1 start minutes, then press
butt ons to set the Timer 1 start hours, then press
butt ons to choose the required chlorine producti on rate (from 10 % to 100 %).
butt on to return the home
and butt ons, then press
to store.
to store.
to store.
to store.
EN
to store and
10