Open the reserve parachute container on the rear of the harness by tear-
ing open the zips. Place the deployment bag in the space provided with the
lines facing to the outside and the handle positioned correctly as shown.
The container can now be closed by running the both zips forward, all the way to the eyelets.
Ensure that the main bridle is correctly routed through the middle of the
opening and around the top of the white reserve pin loop. Do not go ei-
ther side of it, or through the zipped part as this will cause the reserve
pocket to inadvertently open when under pressure.
Correct
Incorrect
8
Using suitable pieces of magic string or
plastic pull the white loops through the
parachute container eyelets.
Now run both zips all the way to the back to close the parachute container.
Make sure you perform a practice throw from a static hang point. Not only does this ensure the correct functioning of your deployment
system it also allows you to become more familiar with the installation process.
Please note, the parachute can only be deployed with the right hand.
Put the handle in place and push the pins through the white loops. The
ends of the pins can be neatened into the available hole exactly as shown.
9