Working Instructions; Grinding Surfaces; Maintenance And Cleaning; Service Centre - Parkside PEXS 270 A1 Bedienungs- Und Sicherheitshinweise

Commissioning / Working ... / Maintenance .../ Service centre / Warranty
To switch on intermittent operation mode:
Press the ON / OFF switch
To switch off intermittent operation mode:
Release the ON / OFF switch
Switching on continuous operation:
Press the ON / OFF switch
down and press the locking button
Switching off after sustained operation:
Press the ON / OFF switch
©

Working instructions

½
Wait until the electric tool has stopped moving
before you put it down.
©

Grinding Surfaces

Turn the electric tool on, place the entire grinding
surface on the substrate that is to be worked
on and move it with moderate pressure across
the workpiece (see Illustration B, C, D).
Note: The rate of metal removal and the
grinding pattern are essentially determined by
the grinding disc that has been selected and
the grinding pressure. Only grind-ing discs that
are in perfect condition will provide good
grinding performance.
Please ensure that the grinding pressure is
even. An excessive increase in the grinding
pressure leads not only to a higher rate of met-
al removal, but also greater wear and tear on
the grinding disc.
You should not use a grinding disc that has
been used for working metal for other materials.
©

Maintenance and Cleaning

WARNING!
carrying out work on the appliance, always remove
the plug from the power socket.
Downloaded from www.Manualslib.com
.
1
.
1
1 , keep it pressed
2
and then release it.
1
RISK OF INJURY! Before
manuals search engine
The rotary sander is maintenance free.
Clean the appliance regularly, preferably direct-
ly on completion of the task.
Use a dry cloth to clean the device. Under no
circumstances should you use petrol, solvent or
cleaners which attack plastic.
Keep the ventilation openings clear at all times.
.
©

Service centre

½
WARNING!
paired only by qualified specialist
personnel using original manufacturer
parts only. This will ensure that your device
remains safe to use.
½
WARNING!
lead needs to be replaced, always have
the replacement carried out by the
manufacturer or its service centre. This
will ensure that your device remains safe to use.
©

Warranty

The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tamper-
ing not carried out by our authorized service branch.
Remove dust clinging to the sander
with a brush.
Have your device re-
If the plug or mains
GB/IE 11