Connecting To External Devices; Setup Menu Configurations - Samsung SMT-171N Benutzerhandbuch

SMT-171/SMT-190-ENG 12/8/05
USER'S MANUAL
Remote Controller
!
@
#
$
%
^
&*
1. POWER( )
Turns the power ON or OFF. There will be a few seconds
delay before the display appears.
2. ID RESET
Reset the system id of remote controller. (Default system id is '1')
3. P.MODE
Select Picture mode in Video. (Dynamic / Standard / Movie /
Custom)
4. AUTO
Auto geometry adjustment in VGA Source.
5. RETURN
Return to the previous menu.
6. MENU
Activates and exits the On Screen Display.
7. LEFT / RIGHT (
/
Increases or decreases the level of active function, and right
button is to select OSD menu, left button is previous OSD
menu.
8. UP / DOWN ( )
/
Move to OSD menu.
9. NUMBER Button
Change the SYSTEM ID for remote controller.
With the SYSTEM ID button pressed, entered the desired
NUMBER by pressing the corresponding button(0~9) to set up
the Remote Controller ID
10. SYSTEM ID
Set the system id of remote controller.
11. BRIGHT, CONTRAST, COLOR, SHARPNESS
Simply control brightness, contrast, color, sharpness via the
remote controller.
12. INFO
Display information of the picture.
9:40 AM Page 7
(
)
1
2
3
4
)
13. SOURCE
Select VGA or Video (Video A / Video B / S-Video) sources.
14. ENTER
Select OSD main menu or sub menu.

Connecting to External Devices

The product can be connected to an external device such as
Camera, DVR,VCR, etc.
VCR Camera B

Setup Menu Configurations

NO SIGNAL DISPLAY
When there is no connection at the VGA and Video input, the On
Screen Display will show this message.
VGA
Check Input Signal
OSD MENU DESCRIPTION
MENU SELECTION
1. Press the MENU button and then
menu.
2. Press the ENTER or button and then
the menu item.
3. Press the MENU button to return to normal picture.
NOTE : If you don't connect to VGA port, menu is not displayed
in VGA mode.
A. INPUT MENU
Video A
Source List : Video A
Video B
S-Video
VGA
Move Enter
- 7 -
외부입력2
DVD/비디오 TIME SLIP 녹화
채널
DVD
프로그래시브
스캔
Camera A DVR
button to display each
/
button to select
/
Input
Exit
E
VCR
복사