Troubleshooting Guide; Weee Symbols - Samsung SMT-171N Benutzerhandbuch

SMT-171/SMT-190-ENG 12/8/05
USER'S MANUAL
D-SUB Connector Pin Assignments
PIN ASSIGNMENTS
Pin No. Pin Name
1 RED VIDEO
E
2 GREEN VIDEO
3 BLUE VIDEO
4 GROUND
5 GROUND
6 RED GROUND
7 GREEN GROUND
8 BLUE GROUND

Troubleshooting Guide

Troubleshooting
The screen doesn't show
up.
The screen is too light or
too dark.
The screen size is not fit for
the VGA signal.
The screen color shows
strange in the VGA signal.
9:40 AM Page 12
Pin No. Pin Name
9 NC
10 SIGNAL CABLE DETECT
11 GROUND
12 SDA(for DDC)
13 H.SYNC(or H+V SYNC)
14 V-SYNC
15 SCL(for DDC)
Troubleshooting Tip
1. Make sure if the power supply is connected
properly.
2. Turn on the power.
3. Select the input signal right for the connected
port.
Control the brightness.
Press the AUTO button among buttons in the
front. (It is used only in the VGA signal.)
In the Setup menu of OSD menu, perform the
Auto Adjustment.
D-SUB

WEEE Symbols

Correct Disposal of This Product
(Waste Electrical &Electronic
Equipment)
(Applicable in the European Union and other
European countries with separate collection systems)
This marking shown on the product or its literature,indicates
that it should not be disposed with
other household wastes at the end of its working life.To
prevent possible harm to the
environment or human health from uncontrolled waste
disposal,please separate this from other
types of wastes and recycle it responsibly to promote the
sustainable reuse of material resources.
Household users should contact either the retailer where
they purchased this product,or their
local government office,for details of where and how they
can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the
terms and conditions of the purchase
contract.This product should not be mixed with other
commercial wastes for disposal.
- 12 -