IKEA OTROLIG Handbuch Seite 10

ENGLISH
zones simultaneously, but without overload
problems.
4 maximum power levels are available and
showed on display: 2.5 – 4.0 – 6.0 – 7.2
kW (7.2 kW is considered as max power of
cooktop).
Points Control panel
1 Unplug and after 1 minute plug the appliance
again into the electrical socket, in the first
60 seconds it is possible to set the required
power level.
Press for approximately 5 seconds
management step 1) button
2
C
Press the
2) to confirm the previous step
3
E
Press - + button (Power management
step 3) to set the chosen level amongst the
different options available (2.5 – 4.0 – 6.0 –
7.2 kW).
4
C
Press the
4) to confirm the previous step
button (Power management step
button (Power management step
At the time of purchase, the hob is set to
maximum power.
After plugging the appliance into the
electrical socket, in the first 60 seconds it is
possible to set the required power level by
running the following points:
Display
The display related to the first
and the second cooking zone
shows
I
(Power
The display shows last level set
previously
The display related to the first
and the second cooking zone
shows the set level.
The display related to the first
and the second cooking zone
shows the set level which flashes
for approximately 2 seconds;
after which the hob emits an
acoustic signal and then turns
itself off; it is now ready for use
10