Operating The Appliance; Switching On; Power Mode; Temperature Mode - Caso ECO 3400 2045 Originalbetriebsanleitung

14.4 Operating the Appliance

14.4.1

Switching On

• Plug the power plug into a suitable outlet.
• The temperature of the cooker plate surface displayed: is the temperature of the surface
of the induction cooker lower than 50°C, the display shows „L". When the temperature
of the cooker plate surface is over 50 °C, it is displaying „H". An acoustic signal sounds.
Now the device is in standby mode.
• Place a suitable cooking pot with its contents to be cooked on the centre on the hob (Ø
160 mm - 260 mm).
• You can operate the left cooking field with 2000 W and the right cooking field with 1400
W separately.
• Now press the On/Standby switch 1 to turn on of the two induction hotplates on. The
control lamp "Level" and "Temp" blink and an acoustic signal sounds.
•
14.4.2

Power Mode

• Press the Function Key 3. The preset power stage "5" is selected and the device turns
on.
• With the + / - Keys (5+6), you can change the settings at any time in a range from 1 –
10.
► We recommend to select the function "Power Mode" in case of steaming food or boiling
water for example. So the overheating protection "E05" will not be activated.
14.4.3

Temperature Mode

• Press the Function Key 2. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 80, 100, 120, 140, 160, 180, 200, 220 and 240°C)
•
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection "E05" will be activated.
caso ECO 3400
Please note
Please note
41