Manual Operation - Maxitrol GV60 Installations- Und Bedienungsanleitung

OPERATING INSTRUCTIONS
▪ Press (small flame) button to decrease
Nighttime Setback Temperature.
▪ Press OFF or simply wait to complete pro-
gramming.
SETTING PROGRAM TIMERS
Default Settings
CE: Program 1: P1
Program 2: P2
CSA: Program 1: P1
Program 2: P2
▪ 2 ON times can be programmed
▪ CE: The day starts at 0:00, ends at 23:50.
▪ CSA: The day starts at 12:00
▪ The ON/OFF times have to be programmed in the order P1
≤ P1 < P2 ≤ P2
▪ If P1 = P1 or P2
▪ To have the fire over night, it can be set:
CE: P2 23:50 and P1
CSA: P2 11:50 and P1
am
▪ Select Timer Mode by briefly pressing the
SET button.
Setting P1 ON Time
▪ Hold the SET button until P1 and
played and the time flashes.
▪ Set the hour by pressing the
button.
: 6:00 P1 : 8:00
: 23:50 P2 : 23:50
: 6:00 P1 : 8:00
am am
: 11:50 P2 : 11:50
pm pm
per day.
, ends at 11:50 .
am pm
.
= P2 the timer is deactivated.
0:00
12:00
am
are dis-
(large flame)
▪ Set the minutes by pressing the
flame) button.
Setting P1 OFF Time
▪ Briefly press SET button to scroll to setting
P1 OFF time. P1 and
the time flashes.
▪ Set the hour by pressing the
button.
▪ Set the minutes by pressing the
flame) button.
Setting P2 ON Time
▪ Briefly press SET button to scroll to setting P2 ON time. P2
is displayed and the time flashes.
▪ See instructions "Setting P1 ON Time".
Setting P2 OFF Time
▪ Briefly press SET button to scroll to setting P2 OFF time.
P2 is displayed and the time flashes.
▪ See instructions "Setting P1 OFF Time".
▪ This concludes programming Timers P1 and P2. Press
OFF or wait. The handset will automatically save your
changes.

MANUAL OPERATION

(Only possible, when MANUAL knob is used)
Access to the pilot burner is only required for ignition with a
match.
When turning main valve knob, do NOT force. Knob has a
slip clutch that clicks until the end stops are reached. This
allows for manual flame height adjustment as well as adjust-
ment to pilot standby position.
1. STOP! Read the safety information included before pro-
ceeding.
18 / 20
FOR OEM USE ONLY
(small
are displayed and
(large flame)
(small