Default Settings; Setting The Time - Maxitrol GV60 Installations- Und Bedienungsanleitung

OPERATING INSTRUCTIONS
▪ Circulating Fan Setting Mode
Turns circulating fan ON and OFF and ad-
justs fan speed.
▪ – Nighttime Setback Temperature
Mode
(Appliance must be in standby mode; pilot
ignited)
The room temperature is measured and
compared to the Nighttime Setback Tem-
perature. The flame height is then auto-
matically adjusted to achieve the Nighttime
Setback Temperature.
▪ TIMER – Timer Mode
(Appliance must be in standby mode; pilot
ignited)
The Timers P1 and P2 (Program 1, Pro-
gram 2) each can be programmed to go ON
and OFF at specific times. For instructions
see Timer Programming Mode.
NOTE: The display shows the set tempera-
ture every 30 seconds.
SETTING °C/24 HOUR OR °F/12 HOUR CLOCK
▪ Press OFF and
display changes from Fahrenheit/12 hour
clock to Celsius/24 hour clock and vice ver-
sa.

SETTING THE TIME

▪ The Time display will flash after either:
a) Installing the battery or
b) Simultaneously pressing the
flame) and
▪ Press (large flame) button to set the hour.
▪ Press (small flame) button to set the min-
ute.
▪ Press OFF or simply wait to return to man-
ual mode.
(small flame) button until
(large
(small flame) buttons.
17 / 20
FOR OEM USE ONLY
SETTING THE ON/OFF TEMPERATURES
Setting the "DAYTIME" Temperature
TEMP, 73 °F / 23 °C

DEFAULT SETTINGS:

▪ Briefly press SET button to scroll to
TEMP. Hold the SET button until the TEMP
flashes.
▪ Press (large flame) button to increase
Daytime Set Temperature.
▪ Press (small flame) button to decrease
Daytime Set Temperature.
▪ Press OFF or simply wait to complete pro-
gramming.
Setting the "NIGHTTIME SETBACK" Temperature
TEMP, "
DEFAULT SETTINGS:
▪ Briefly press SET button to scroll to
TEMP mode. Hold the SET button until the
Temperature flashes.
▪ Press (large flame) button to increase
Nighttime Setback Temperature.
" (OFF)