General Information; Key Features - Renogy ROVER Serie Installation

The Rover PG Series charge controllers are intelligent positive ground controllers suitable for
various off-grid solar applications. It protects the battery from being over-charged by the solar
modules and over-discharged by the loads. The controller features a smart tracking algorithm that
maximizes the energy from the solar PV module(s) and charge the battery. At the same time, the
low voltage disconnect function (LVD) will prevent the battery from over discharging.
The Rover PG's charging process has been optimized for long battery life and improved system
performance. The comprehensive self-diagnostics and electronic protection functions can prevent
damage from installation mistakes or system faults.

Key Features

Automatically detect 12V/24V/36V/48V DC system voltages
Innovative MPPT technology with high tracking efficiency up to 99% and peak
conversion efficiency of 98%
Deep cycle Sealed, Gel, Flooded and Lithium battery option ready
Electronic protection: Overcharging, over-discharging, overload, and short circuit
Reverse protection: Any combination of solar module and battery, without causing
damage to any component
Customizable charging voltages
RS232 port to communicate with BT-1 Bluetooth Module or DM-1 4G Data Module
Charges over discharged lithium batteries
Positive ground charge controller
MPPT Technology
The MPPT Charge Controller utilizes Maximum Power Point Tracking technology to extract
maximum power from the solar module(s). The tracking algorithm is fully automatic and does
not require user adjustment. MPPT technology will track the array's maximum power point
voltage (Vmp) as it varies with weather conditions, ensuring that the maximum power is
harvested from the array throughout the course of the day.
Current Boost
In many cases, the MPPT charge controller will "boost" up the current in the solar system. The
current does not come out of thin air. Instead, the power generated in the solar panels is the
same power that is transmitted into the battery bank. Power is the product of Voltage (V) x
Amperage (A).
EN

General Information

04