Parameter Settings - Renogy ROVER Serie Installation

Parameter Settings

To enter the following settings, in the parameters setting screen press the Right arrow button.
Screen
Battery system voltage
1
Battery type
Nominal battery capacity
Device address
Overvoltage threshold
Charging limit voltage
2
Equalization Voltage
Boost charging voltage
Float charging voltage
Boost charging recovery voltage
3
Over-discharge recovery voltage
Under-voltage warning level
Low voltage disconnect
4
Low voltage disconnect delay
Equalization time
Boost time
EN
Setting icon
AUTO/SLD
BST:14.4V
SET
LVD:11.0V
Parameter
System voltage indication
Battery type indication
Boost charging voltage 14.4V
Over-discharge voltage 11.0V
Displayed
Parameter
BatSysVol:
BatType:
Capacity:
Address:
OverVolDsc:
ChgLimitVol:
EquChgVol:
BstChgVol:
FltChgVol:
BstChgRev:
LowVolRev:
UndVolWrn:
LowVolDisc:
LVD Delay：
Equ-Time:
Bst-Time:
Description
12v,24v,36v,48v, AUTO
"SLD" Sealed lead-acid battery
"FLD" Flooded lead-acid battery
"GEL" Gel battery
"Li" Lithium battery
"USE" user defined
0-9999
1-60
9.0-17.0V
9.0-17.0V
9.0-17.0V
9.0-17.0V
9.0-17.0V
0-60s
0-300 MIN
0-300 MIN
9.0-17.0V
0-60s
0-300 Min
0-300 Min
24