Renogy ROVER Serie Installation Seite 23

Screen
1
2
3
4
EN
Displayed
Item/Parameter
Chag State: Idle
BatVol: 11.6V
PvVol: 0V
ChagCrt
LoadState: OFF
LoadCrt: 0A
BatSoc: 100%
Dev Temp: 27°C
ChagPower: 0W
LoadPower: 0W
MinBatVol: 12.5V
MaxBatVol: 13.5V
Fault: NULL
Description
Charging State Indicators:
"Idle", no charging
"MPPT", MPPT charging
"EQU", Equalization charging
"BST", Boost charging
"FLT", Float charging
"LIMIT", current-limited charging
Battery Voltage
Solar Panel Voltage
Charging Current
Load in "ON" or "OFF"
Load current
Remaining battery capacity
Controller Temperature
Current Wattage
Load Wattage
The current day's minimum battery voltage
The current day's maximum battery voltage
Controller Error Codes:
"BAT-LDV" over-discharge
"BAT-OVD" over-voltage
"BAT-UVW" under-voltage warning
"L-SHTCRT" load short-circuit
"L-OVRCRT" load over-current
"DEV-OVRTMP" internal over-temperature
"BAT-OVRTMP" battery over-temperature
"PV-OVP" solar panel over wattage
"PV-OC-OVD" solar panel over-voltage
"BAT-REV" battery reverse-polarity
22