Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Our computerized display console on the Sunny Obsidian Surge 500 Meter Water Rowing Machine allows the user to tailor a personalized
workout by monitoring their progress. During a workout, the display console will alternately and repeatedly display the Time, Time/500M, SPM,
Distance, Strokes, Total Strokes, Calories Burned, and Pulse (all the above).
【FUNCTION BUTTONS】
UP▲/ DOWN▼:
Press these two buttons to scroll through the available selection.
To adjust the function value upward and downward.
ENTER:
To confirm your selection.
During training, press the button to scan each display function.
START / STOP:
To start and stop your selected workout program.
RESET:
To return the meter back to the main menu. Press and hold to reset values.
RECOVERY:
To activate the RECOVERY PROGRAM that will automatically evaluate your fitness immediately after your workout.
【FUNCTIONS】
TIME:
Set target time by pressing UP and DOWN buttons (1 min ~ 99 min), in 1 minute increments.
TIME/500M:
Your average 500 M time is automatically displayed.
SPM:
Strokes per minute.
DISTANCE:
Preset target value by pressing UP and DOWN buttons (100 ~ 99900 meters), 100 meters increments.
STROKES:
Set target value by pressing UP and DOWN buttons (10 ~ 9990 strokes), 10 stroke increments.
TOTAL STROKES: Accumulates total strokes from 0 up to 9999.
CALORIES:
Set target CALORIES by pressing UP or DOWN buttons (10 Cal ~ 9990 Cal), 10 Cal increments.
HRC/PULSE:
Displays heart rate. In Manual Mode, set target value by pressing UP and DOWN buttons (30 ~ 240), 1 BPM increments. HRC
will display at the top of the meter. The meter will display your heart rate during training. When it reaches the target value,
PULSE will flash, and the meter will beep until it is changed to another mode or you remove the chest belt. Pulse measurement
function only works with 5.3 KHz chest strap heart rate monitors.
CALENDAR:
The meter will display year, month, and day when meter is in sleep mode.
TEMPERATURE:
The meter will display current room temperature when the meter is in sleep mode.
CLOCK:
The meter will display current clock when the meter is in sleep mode.
【OPERATION】
1. Install 2PCS AA batteries (included) and meter will beep for 2 seconds (Fig. 1).
Then, the meter enters into the CLOCK & CALENDAR MODE (Fig. 2).
2. The CLOCK will flash. Press UP to set the hour. Press ENTER to confirm.
Press UP to set the minutes. Press ENTER to confirm. Continue to set up YEAR (in the STROKES window); MONTH (in the CALORIES window);
DAY (in the PULSE window) by pressing UP or DOWN. Each time, press ENTER to confirm.
After you confirm it, the ALARM will beep. To skip setting up an alarm, press ENTER.
To set up an alarm, press UP KEY to turn on ALARM. An arrow will appear next to ALARM.
Press ENTER. CLOCK window will flash. Press UP or DOWN to set the alarm time. Press ENTER to confirm. Meter will go into the SPORT
screen (Fig.3).
Fig. 1
Fig. 3
EXERCISE METER
13
Fig. 2
Fig. 4
Werbung
Inhaltsverzeichnis
