CAMPAGNOLO Neutron Ultra Bedienunganleitung Seite 35

6. DISASSEMBLY, ASSEMBLY AND LUBRICATION OF HUBS
CAUTION!
Always wear protective gloves and glasses while
working on the hubs.
NEUTRON ULTRA wheel hubs do not have lubrication holes, so
™ ™
they have to be removed to perform this operation.
6.1 - DISASSEMBLY AND ASSEMBLY OF THE FRONT HUB
• Using a stiff blade (such as small knife) positioned as indica-
ted in fig. 21 and taking care not to damage the hub or the
spokes, remove the side covers (A) from the hub.
• Unscrew the locking nut (B - Fig. 22) with a fully inserted
5 mm Allen wrench; counter the rotation of the axle with
another 5 mm Allen wrench fully inserted on the opposite
end of the axle itself.
• Using a 2.5 mm Allen wren-
ch, slacken the screw by 3
turns (D - Fig. 23).
14
22
B
21
A
A
23
D