CAMPAGNOLO Neutron Ultra Bedienunganleitung Seite 30

• Unscrew the locking nut (B - Fig. 11) with a fully inserted
5 mm Allen wrench; counter the rotation of the axle with
another 5 mm Allen wrench fully inserted on the opposite
end of the axle itself.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns
(C - Fig. 12).
• Unscrew and remove the lock ring (D - Fig. 13), remove
the ring (E - Fig. 13), then slide out the axle (F - Fig. 13).
• Slide out the spoke to be replaced (G - Fig. 14) from the
hub.
12
C
13
D E
11
B
F
14
G
9