CAMPAGNOLO Neutron Ultra Bedienunganleitung Seite 37

6.2 - DISASSEMBLY AND ASSEMBLY OF THE REAR HUB
• Remove the sprocket set (Section 2 of the "Owner's Manual - PART 1).
• Using a stiff blade (such as small knife) positioned as indicated in fig. 26 and taking care not
to damage the hub or the spokes, remove the side covers from the hub (A - Fig. 26) from the
hub.
• Unscrew the locking nut (B - Fig. 27) with a fully inserted 5 mm Allen wrench; counter the
rotation of the axle with another 5 mm Allen wrench fully inserted on the opposite end of
the axle itself.
• Using a 2.5 mm Allen wrench, slacken the screw by 3 turns (D - Fig.28).
16
27
B
26
A
28
D